Photo	Generation	Molds	BottomStyle	InsideLogoOrientation	InsideLogoStyle	MoldIdentificationLayout	MoldPositionLayout	MoldPositionStyle	PatPendLayout	PatPendStyle	StudLogoStyle	PipStyle	InsideRibStyle	StudRecessStyle
	05 - Tubeless - Logo inside	5	None	Left To Right	Blockletters	None	None	None	None	None	Wide Straight 'O'	Centered Medium Bottom Edge	Mixed	Large (3mm)
	06 - Full stud - with stud logo	11	None	None	None	None	Center (Top To Bottom)	Typed	None	None	Wide Straight 'O'	Centered Narrow Bottom Edge	Spotted	None
	11 - Tubeless - No logo inside - corner pip	14	Cross-support	None	None	None	Right (Bottom To Top)	Typed	None	None	Wide Straight 'O'	Single Cornered Narrow Bottom Edge	Mixed	Large sloped (3mm)
	13 - Tubeless - No logo inside - other pips	3	None	None	None	None	Center (Bottom To Top)	Typed	None	None	Wide Straight 'O'	Centered Narrow Bottom Edge	Across	Large (3mm)
	19 - Other parts - logo on studs	4	Waffles	Left To Right	Dogbone	None	Left + Right	Typed	None	None	Wide Straight 'O'	Mixed Narrow Top Edge	None	Large (3mm)
	20 - Old logo - 3mm stud recess - center pip	1	Tubes Without Cross-support	None	None	None	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal	Wide Straight 'O'	Centered Wide Bottom Edge	None	Large (3mm)
	21 - Old logo - 3mm stud recess - corner-pip	18	Cross-support	None	None	None	Left (Bottom To Top)	Typed	None	None	Wide Straight 'O'	Double Cornered Narrow Bottom Edge	None	Large (3mm)
	22 - Old logo - 3mm stud recess - other pips	1	Tubes With Cross-support	None	None	None	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal	Wide Straight 'O'	Stud	None	Large (3mm)
	23 - Old logo - smaller stud recess - corner-pip - no mold-id	16	Cross-support	None	None	None	None	None	None	None	Wide Straight 'O'	Double Cornered Narrow Bottom Edge	None	Small (2-2,2mm)
	24 - Tall wide straight 'O' - corner pip - smaller stud recess	12	Cross-support	None	None	None	Left (Bottom To Top)	Typed	None	None	Tall Wide Straight 'O'	Double Cornered Narrow Bottom Edge	None	Small (2-2,2mm)
	25 - Old logo - smaller stud recess - centered pip - no mold-id	1	Cross-support	None	None	None	Left (Bottom To Top)	Typed	None	None	None	Centered Side Surface	None	Small (2-2,2mm)
	32 - Old logo - 2x2 with mold identifiers	10	Tubes Without Cross-support	None	None	Left (Bottom To Top)	Right (Bottom To Top)+Bottom	Typed	Top+Bottom/Top+Right	Normal	Wide Straight 'O'	Single Cornered Narrow Bottom Edge	None	Small (2-2,2mm)
	33 - Old logo - 2x3 with mold identifiers	10	Tubes Without Cross-support	None	None	Left (Bottom To Top) with exception(s)	Right (Bottom To Top) with exception(s)	Typed	Top+Bottom (right-aligned)	Normal	Wide Straight 'O'	Single Cornered Narrow Bottom Edge	None	Small (2-2,2mm)
	34 - Old logo - 2x4 with mold identifiers	19	Tubes Without Cross-support	None	None	Right (Top To Bottom)	Left (Top To Bottom)	Typed	Top+Bottom (centered)	Normal	Wide Straight 'O'	Single Cornered Narrow Bottom Edge	None	Small (2-2,2mm)
	35 - Old logo - 2x2r - with mold identifiers	1	None	None	None	Right (Circumferential)	Center (Circumferencial)	Typed	None	None	Wide Round 'O'	Centered Narrow Bottom Edge	None	Small (2-2,2mm)
	40 - Narrow Straight 'O' without mold identifiers	1	Cross-support	None	None	None	Left (Bottom To Top)	Typed	None	None	Narrow Straight 'O'	Double Cornered Narrow Bottom Edge	None	Small (2-2,2mm)
	41 - Narrow Straight 'O' 1x6 with mold identifiers	2	Cross-support	None	None	Right (Top To Bottom)	Left (Bottom To Top)	Typed	None	None	Narrow Straight 'O'	Single Cornered Narrow Bottom Edge	None	Small (2-2,2mm)
	42 - Narrow Straight 'O' 1x8 with mold identifiers	4	Cross-support	None	None	Right (Top To Bottom)	Left (Bottom To Top)	Typed	None	None	Narrow Straight 'O'	Single Cornered Narrow Bottom Edge	None	Small (2-2,2mm)
	45 - Other parts - modern logo	1	None	None	None	None	None	None	None	None	Narrow Straight 'O'	Single Cornered Narrow Bottom Edge	None	Medium (2,3-2,5mm)
	90 - 90-Temp 10x20	21	Cross-support	None	None	None	None	None	None	None	Modern	Bottom	None	Large sloped (3mm)

05 - Tubeless - Logo inside (1955-1956)

Photo	CatId	Mold	Members	PipStyle	InsideRibStyle	StudRecessStyle	Associations
	05d	Small blockletter - Mixed stud-logo	3 / 9	Centered Medium Bottom Edge	Both	Large (3mm)
	05e	Small blockletter - Mixed stud-logo	3 / 9	Centered Medium Bottom Edge	Mixed	Large (3mm)
	05f	Small blockletter - With stud-logo	5 / 9	Centered Medium Bottom Edge	Mixed	Large (3mm)
	05g	Small blockletter - With stud logo	6 / 9	Centered Wide Bottom Edge	Mixed	None
	05h	Small blockletter - No slotted bricks	2 / 9	Centered Wide Bottom Edge	Mixed	None

06 - Full stud - with stud logo (1955-1956)

Photo	CatId	Mold	Members	MoldPositionLayout	MoldPositionStyle	Associations
	06a	1x2 slotted - pip long side - no dots	4 / 8	Center (Top To Bottom)	Typed
	06b	1x2 slotted - pip long side - one dot	4 / 8	Center (Top To Bottom)	Typed
	06c	1x2 slotted - pip long side - two dots below	5 / 8	Center (Top To Bottom)	Typed
	06d	1x2 slotted - pip long side - two dots right	4 / 8	Center (Top To Bottom)	Typed
	06e	1x2 no slots - pip long side - no dots	5 / 8	Center (Top To Bottom)	Typed
	06f	1x2 no slots - pip long side - one dot	4 / 8	Center (Top To Bottom)	Typed
	06g	1x2 no slots - pip long side - two dots below	3 / 8	Center (Top To Bottom)	Typed
	06h	1x2 no slots - pip long side - two dots right	4 / 8	Center (Top To Bottom)	Typed
	06i	1x2 mixed - pip short side - weak rib	7 / 14	Center (Top To Bottom)	Typed
	06j	1x2 mixed - pip short side - full rib	7 / 14	Center (Top To Bottom)	Typed	06k (Slot removed)
	06k	1x2 no slots - pip short side	1 / 1	None	None	06j (Slot removed)

11 - Tubeless - No logo inside - corner pip (1956-1957)

Photo	CatId	Mold	Members	PipStyle	BottomStyle	InsideRibStyle	MoldPositionLayout	MoldPositionStyle	StudRecessStyle	Associations
	11d	2x4 Centered and mirrored numbers - corner-pip	12 / 20	Single Cornered Narrow Bottom Edge	None	Across	Center (Bottom To Top)	Typed	Large (3mm)
	11f	2x4 Sloped stud recesses	20 / 20	Single Cornered Narrow Bottom Edge	None	Across	Left (Bottom To Top)	Typed	Large sloped (3mm)
	11g	2x4 Normal stud recesses	20 / 20	Single Cornered Narrow Bottom Edge	None	Across	Left (Bottom To Top)	Typed	Large (3mm)
	11h	2x3 Sloped stud recesses	10 / 21	Single Cornered Narrow Bottom Edge	None	Across	Left (Bottom To Top)	Typed	Large sloped (3mm)
	11i	2x3 Normal stud recesses	17 / 18	Single Cornered Narrow Bottom Edge	None	None	Left (Bottom To Top)	Typed	Large (3mm)
	11j	2x2 Sloped stud recesses - handwritten numbers	27 / 28	Single Cornered Narrow Bottom Edge	None	Across	Center (Bottom To Top)	Hand-written	Large sloped (3mm)	11k (Matching surface pattern),11l (Matching surface pattern)
	11k	2x2 Sloped stud recesses - typed weak numbers	26 / 28	Single Cornered Narrow Bottom Edge	None	Across	Center (Bottom To Top)	Typed	Large sloped (3mm)	11j (Matching surface pattern),11l (Matching surface pattern)
	11l	2x2 Sloped stud recesses - typed strong numbers	28 / 28	Single Cornered Narrow Bottom Edge	None	Across	Center (Bottom To Top)	Typed	Large sloped (3mm)	11j (Matching surface pattern),11k (Matching surface pattern)
	11n	2x8 + 2x10 single pip - sloped stud recesses	4 / 8	Single Cornered Narrow Bottom Edge	Cross-support	Mixed	Right (Bottom To Top)	Typed	Large sloped (3mm)
	11o	2x8 + 2x10 single pip - normal stud recesses	4 / 8	Single Cornered Narrow Bottom Edge	Cross-support	Mixed	Right (Bottom To Top)	Typed	Large (3mm)
	11u	2x4 Without ribs - single pip, bolder stud font	20 / 20	Single Cornered Narrow Bottom Edge	None	None	None	None	Large (3mm)
	11v	2x4 Without ribs - double pip	3 / 3	Double Cornered Narrow Bottom Edge	None	None	None	None	Large (3mm)
	11x	1x2 Small stud recesses	2 / 24	Single Cornered Narrow Bottom Edge	None	Across	Center (Top To Bottom)	Typed	Small (2-2,2mm)
	11z	2x4 Without ribs - single pip, normal stud font	14 / 14	Single Cornered Narrow Bottom Edge	None	None	None	None	Large (3mm)

13 - Tubeless - No logo inside - other pips (1956-1957)

Photo	CatId	Mold	Members	PipStyle	InsideRibStyle	MoldPositionLayout	Associations
	13a	Pip on stud	10 / 11	Stud	None	Left (Bottom To Top)
	13d	2x4 Centered and mirrored numbers - centered pip	4 / 13	Centered Narrow Bottom Edge	Across	Center (Bottom To Top)
	13e	2x4 Centered (but not mirrored) numbers - pip on stud	2 / 2	Stud	None	Center (Bottom To Top)

19 - Other parts - logo on studs (1958-1969)

Photo	CatId	Mold	Members	InsideLogoOrientation	InsideLogoStyle	MoldPositionLayout	MoldPositionStyle	StudRecessStyle	Associations
	19B	Waffle plates with stud recess, logo underneath and stud logo top to bottom	8 / 8	Left To Right	Dogbone	Left + Right	Typed	Large (3mm)	19A (Matching waffle pattern)
	19C	Waffle plates with stud recess, no logo underneath and large stud recess	12 / 20	None	None	Left + Right	Typed	Large (3mm)
	19D	Waffle plates with stud recess, no logo underneath and sloped stud recess	12 / 16	None	None	Left + Right	Typed	Large sloped (3mm)
	19E	Waffle plates with stud recess, no logo underneath, 2x8 have 16 stud recesses	1 / 1	None	None	None	None	Large (3mm)

20 - Old logo - 3mm stud recess - center pip (1958-1959)

Photo	CatId	Mold	Members	Associations
	20b	Tubes - wide pip - rotated	1 / 1

21 - Old logo - 3mm stud recess - corner-pip (1958-1959)

Photo	CatId	Mold	Members	PipStyle	BottomStyle	MoldPositionLayout	MoldPositionStyle	PatPendLayout	PatPendStyle	Associations
	21aa	4x4 Cornered	4 / 8	Single Cornered Narrow Bottom Edge	Tubes With Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal
	21ac	2x8 double pip left	8 / 8	Double Cornered Narrow Bottom Edge	Tubes With Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal
	21ae	2x10 double pip left	8 / 8	Double Cornered Narrow Bottom Edge	Tubes With Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal
	21ag	1x2 - Mold #1 Stud logo along - rotated	2 / 2	Single Cornered Narrow Bottom Edge	None	Center (Top To Bottom)	Typed	None	None	21af (Matching bottom pattern)
	21ah	1x2 - Mold #2 Stud logo along - opposite pip positions	28 / 28	Single Cornered Narrow Bottom Edge	None	Center (Top To Bottom)	Typed	None	None	23t (Matching patterns, but with different stud-sizes),23u (Matching patterns, but with different stud-sizes)
	21al	1x6 Cross support Large Hole Numbered	5 / 12	Double Cornered Narrow Bottom Edge	Cross-support	Left (Bottom To Top)	Typed	None	None
	21am	1x8 Cross support Large stud recess Unnumbered	2 / 18	Double Cornered Narrow Bottom Edge	Cross-support	None	None	None	None
	21an	1x8 Cross support Large stud recess Weak numbers	8 / 12	Double Cornered Narrow Bottom Edge	Cross-support	Left (Bottom To Top)	Typed	None	None
	21ao	1x8 Cross support Large stud recess Bold numbers	11 / 12	Double Cornered Narrow Bottom Edge	Cross-support	Left (Bottom To Top)	Typed	None	None
	21b	2x4 - Mold number left - pip left	16 / 18	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	Left (Bottom To Top)	Typed	Top+Bottom (centered)	Normal
	21c	2x4 - Mold number right - sharp edges on tubes	1 / 20	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal
	21j	2x4 - Bold "Pat. pend." #2	2 / 20	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal
	21m	2x3 - Pip right - mold 1	7 / 20	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal
	21n	2x3 - Pip right - mold 2	1 / 16	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal
	21o	2x3 - Pip left - mold 1 (round tube edge)	16 / 16	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal	21p (Matching bottom pattern)
	21p	2x3 - Pip left - mold 2 (sharp tube edge)	16 / 16	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal	21o (Matching bottom pattern)
	21r	2x3 - Pip right - mold 3 (sharp tube edge 2)	4 / 16	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal
	21v	2x2 pip left/right - vertical logo	19 / 28	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal

22 - Old logo - 3mm stud recess - other pips (1958-1959)

Photo	CatId	Mold	Members	Associations
	22a	4x4 Cornered	1 / 2

23 - Old logo - smaller stud recess - corner-pip - no mold-id (1958-1959)

Photo	CatId	Mold	Members	PipStyle	BottomStyle	InsideRibStyle	MoldPositionLayout	MoldPositionStyle	PatPendLayout	PatPendStyle	StudLogoStyle	Associations
	23aa	1x2 - Mold #7 Pat. pend. ITL	1 / 1	Single Cornered Narrow Bottom Edge	None	Across	Center (Top To Bottom)	Typed	Right	Normal	Wide Round 'O'
	23ac	1x6 Cross support Small Hole Unnumbered	9 / 9	Double Cornered Narrow Bottom Edge	Cross-support	None	None	None	None	None	Wide Straight 'O'
	23ae	1x8 Cross support Small hole Unnumbered Short wide stud-logo	8 / 8	Double Cornered Narrow Bottom Edge	Cross-support	None	Left (Bottom To Top)	Typed	None	None	Wide Straight 'O'
	23af	1x8 Cross support Small hole Numbered Rotated pos.numbers	1 / 8	Centered Side Surface	Cross-support	None	Left (Left To Right)	Typed	None	None	Wide Round 'O'
	23ah	1x2 - Mold #9 stud logo along - no mold numbers	1 / 1	Single Cornered Narrow Bottom Edge	None	None	None	None	None	None	Wide Straight 'O'
	23c	2x4 - mold id left top to bottom	20 / 20	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	None	Left (Top To Bottom)	Typed	Top+Bottom (centered)	Normal	Wide Straight 'O'
	23d	2x4 - mold id left bottom to top #1	18 / 20	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	None	Left (Bottom To Top)	Typed	Top+Bottom (centered)	Normal	Wide Straight 'O'
	23e	2x4 - mold id left bottom to top #2	1 / 1	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	None	Left (Bottom To Top)	Typed	Top+Bottom (centered)	Normal	Wide Straight 'O'
	23f	2x4 - mold id right top to bottom - small pat.pend.	1 / 18	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	None	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Small	Wide Straight 'O'
	23k	2x3 - pip left	16 / 16	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	None	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal	Wide Straight 'O'
	23o	2x2 - horizontal stud-logo	18 / 20	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	None	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal	Wide Straight 'O'
	23r	2x10	1 / 1	Double Cornered Narrow Bottom Edge	Tubes With Cross-support	None	Right (Top To Bottom)	Typed	Top+Bottom (centered)	Normal	Wide Straight 'O'
	23s	2x2 and 2x3 - without pat.pend/mold-id	1 / 8	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	None	None	None	None	None	Wide Straight 'O'
	23t	1x2 - Mold #1 Stud logo along - evolution from 21ah	28 / 28	Single Cornered Narrow Bottom Edge	None	None	Center (Top To Bottom)	Typed	None	Normal	Wide Straight 'O'	21ah (Matching patterns, but with different stud-sizes),23u (Matching patterns, but with different stud-sizes)
	23u	1x2 - Mold #2 Stud logo along - both small and large stud recess	1 / 1	Single Cornered Narrow Bottom Edge	None	None	Center (Top To Bottom)	Typed	None	Normal	Wide Straight 'O'	21ah (Matching patterns, but with different stud-sizes),23t (Matching patterns, but with different stud-sizes)
	23y	2x3 Mirrored handwritten mold pos	4 / 24	Single Cornered Narrow Bottom Edge	Tubes Without Cross-support	None	Right (Top To Bottom)	Hand-written	None	None	Wide Round 'O'

24 - Tall wide straight 'O' - corner pip - smaller stud recess (1958-1959)

Photo	CatId	Mold	Members	PipStyle	BottomStyle	MoldPositionLayout	PatPendLayout	PatPendStyle	Associations
	24a	4x4 corner brick	8 / 8	Single Cornered Narrow Bottom Edge	Tubes With Cross-support	Right (Top To Bottom)	Right	Normal
	24b	2x10	1 / 8	Double Cornered Narrow Bottom Edge	Tubes Without Cross-support	Right (Top To Bottom)	Right	Normal
	24c	2x8 double pip left - pat pend left	2 / 8	Double Cornered Narrow Bottom Edge	Tubes With Cross-support	Left (Bottom To Top)	Right	Normal
	24d	2x8 double pip right - pat pend left	6 / 8	Double Cornered Narrow Bottom Edge	Tubes With Cross-support	Left (Bottom To Top)	Right	Normal
	24e	2x8 double pip left - pat pend nearer center	8 / 8	Double Cornered Narrow Bottom Edge	Tubes With Cross-support	Left (Bottom To Top)	Left	Normal
	24f	1x6 Cross support Small Hole Numbered Normal Pip left Logo Bottom Up	8 / 8	Double Cornered Narrow Bottom Edge	Cross-support	Left (Bottom To Top)	None	None
	24g	1x6 Cross support Small Hole Numbered Normal Pip left Logo Top Down	8 / 8	Double Cornered Narrow Bottom Edge	Cross-support	Left (Bottom To Top)	None	None
	24h	1x6 Cross support Small Hole Numbered Normal Pip Right	1 / 8	Double Cornered Narrow Bottom Edge	Cross-support	Left (Bottom To Top)	None	None
	24i	1x8 Cross support Small hole Unnumbered Tall wide stud-logo	1 / 1	Double Cornered Narrow Bottom Edge	Cross-support	Left (Bottom To Top)	None	None
	24j	1x8 Cross support Small hole Numbered	5 / 8	Double Cornered Narrow Bottom Edge	Cross-support	Left (Bottom To Top)	None	None
	24k	1x8 Cross support Small hole Numbered Rotated logo	1 / 1	Double Cornered Narrow Bottom Edge	Cross-support	Left (Bottom To Top)	None	None
	24l	Copy of 1x8 Cross support Small hole Numbered Glossy inside	6 / 8	Double Cornered Narrow Bottom Edge	Cross-support	Left (Bottom To Top)	None	None

25 - Old logo - smaller stud recess - centered pip - no mold-id (1960-1965)

Photo	CatId	Mold	Members	Associations
	25c	1x6 Wide round logo	1 / 1

32 - Old logo - 2x2 with mold identifiers (1960-1965)

Photo	CatId	Mold	Members	MoldIdentificationLayout	MoldPositionLayout	PatPendLayout	StudLogoStyle	Associations
	32b	2x2 - B-mold	2 / 32	Left (Bottom To Top)	Right (Bottom To Top)+Bottom	Top+Bottom/Top+Right	Wide Straight 'O'
	32c1	2x2 - C-mold 1 - Small mold-id left	8 / 32	Left (Top To Bottom)	Right (Top To Bottom)	Top+Bottom (centered)	Wide Straight 'O'
	32c2	2x2 - C-mold 2 - Small mold-id right	22 / 28	Right (Top To Bottom)	Left (Bottom To Top)	Top+Bottom (centered)	Wide Straight 'O'
	32c3	2x2 - C-mold 3 - Large mold-id left	1 / 1	Left (Top To Bottom)	Right (Top To Bottom)	Top+Bottom (centered)	Wide Straight 'O'
	32d1	2x2 - D-mold 1 - Pip right	3 / 32	Left (Bottom To Top)	Right (Top To Bottom)	Top+Bottom (centered)	Wide Round 'O'
	32e1	2x2 - E-mold 1 - Mold-id top to bottom	28 / 34	Left (Top To Bottom)	Right (Top To Bottom)	Top+Bottom (centered)	Wide Round 'O'
	32e2	2x2 - E-mold 2 - Mold-id bottom to top	26 / 28	Left (Bottom To Top)	Right (Top To Bottom)	Top+Bottom (centered)	Wide Round 'O'
	32k	2x2 - K-mold	4 / 34	Right (Bottom To Top)	Left (Bottom To Top)	Top+Bottom (centered)	Wide Round 'O'
	32l	2x2 - L-mold	7 / 36	Right (Bottom To Top)	Left (Bottom To Top)	Top+Bottom (centered)	Wide Round 'O'	32l2 (Matching pattern - rotated 180 deg)
	32l2	2x2 - L-mold 2 - Pip right	1 / 2	Right (Bottom To Top)	Left (Bottom To Top)	Top+Bottom (centered)	Wide Round 'O'	32l (Matching pattern - rotated 180 deg)

33 - Old logo - 2x3 with mold identifiers (1960-1965)

Photo	CatId	Mold	Members	MoldIdentificationLayout	MoldPositionLayout	MoldPositionStyle	StudLogoStyle	Associations
	33a	2x3 - A-mold	4 / 20	Left (Bottom To Top) with exception(s)	Right (Bottom To Top) with exception(s)	Typed	Wide Straight 'O'
	33b1	2x3 - B-mold 1 (Normal 'B')	5 / 18	Left (Bottom To Top)	Right (Top To Bottom)	Typed	Wide Round 'O'
	33c1	2x3 - C-mold 1 (Normal 'C')	2 / 26	Left (Top To Bottom)	Right (Top To Bottom)	Typed	Wide Round 'O'
	33c2	2x3 - C-mold 2 ('C.')	1 / 3	Left (Bottom To Top)	Right (Top To Bottom)	Typed	Wide Round 'O'
	33d1	2x3 - D-mold 1 (Plain)	21 / 24	Right (Top To Bottom)	Left (Bottom To Top)	Typed	Wide Round 'O'	33d2 (Matching pattern - rotated 180 deg)
	33d2	2x3 - D-mold 2 (Rotated stud-logo)	1 / 24	Right (Top To Bottom)	Left (Bottom To Top)	Typed	Wide Round 'O'	33d1 (Matching pattern - rotated 180 deg)
	33d3	2x3 - D-mold 3 (Hand-written)	1 / 1	Left (Bottom To Top)	Right (Top To Bottom)	Hand-written	Wide Round 'O'
	33g	2x3 - G-mold	7 / 22	Right (Top To Bottom)	Left (Top To Bottom)	Typed	Wide Round 'O'
	33h1	2x3 - H-mold (Plain)	4 / 22	Right (Top To Bottom)	Left (Bottom To Top)	Typed	Wide Round 'O'
	33h2	2x3 - H-mold (Hand-written)	1 / 1	Right (Top To Bottom)	Left (Bottom To Top)	Hand-written	Wide Round 'O'

34 - Old logo - 2x4 with mold identifiers (1960-1965)

Photo	CatId	Mold	Members	PipStyle	MoldIdentificationLayout	MoldPositionLayout	MoldPositionStyle	PatPendStyle	StudLogoStyle	Associations
	34a1	2x4 - A-mold 1 - Mold identifier right	20 / 20	Single Cornered Narrow Bottom Edge	Right (Top To Bottom)	Left (Top To Bottom)	Typed	Normal	Wide Straight 'O'
	34b	2x4 - B-mold	17 / 20	Single Cornered Narrow Bottom Edge	Right (Top To Bottom)	Left (Top To Bottom)	Typed	Normal	Wide Straight 'O'
	34d1	2x4 - D-mold 1 - Small 'Pat. pend.' large 'D'	7 / 20	Single Cornered Narrow Bottom Edge	Left (Top To Bottom)	Right (Bottom To Top)	Typed	Small	Wide Straight 'O'
	34d2	2x4 - D-mold 2 - Normal 'Pat. pend.' small 'D'	7 / 22	Single Cornered Narrow Bottom Edge	Left (Bottom To Top)	Right (Bottom To Top)	Typed	Normal	Wide Straight 'O'
	34e	2x4 - E-mold	19 / 22	Single Cornered Narrow Bottom Edge	Left (Bottom To Top)	Right (Bottom To Top)	Typed	Normal	Wide Straight 'O'
	34f2	2x4 - F-mold 2 - Mold identifier right	3 / 20	Single Cornered Narrow Bottom Edge	Right (Top To Bottom)	Left (Bottom To Top)	Typed	Normal	Wide Straight 'O'
	34g1	2x4 - G-mold 1	17 / 22	Single Cornered Narrow Bottom Edge	Left (Top To Bottom)	Right (Bottom To Top)	Typed	Normal	Wide Straight 'O'	34g2 (Matching pattern - rotated 180 deg)
	34g2	2x4 - G-mold 2 - Rotated 180 deg.	2 / 5	Single Cornered Narrow Bottom Edge	Left (Top To Bottom)	Right (Bottom To Top)	Typed	Normal	Wide Straight 'O'	34g1 (Matching pattern - rotated 180 deg)
	34h1	2x4 - H-mold 1	11 / 20	Single Cornered Narrow Bottom Edge	Right (Top To Bottom)	Left (Bottom To Top)	Typed	Normal	Wide Straight 'O'	34h2 (Matching pattern - rotated 180 deg)
	34h2	2x4 - H-mold 2 - Rotated 180 deg.	2 / 6	Single Cornered Narrow Bottom Edge	Right (Top To Bottom)	Left (Bottom To Top)	Typed	Normal	Wide Straight 'O'	34h1 (Matching pattern - rotated 180 deg)
	34j2	2x4 - J-mold 2	2 / 3	Centered Side Surface	Left (Bottom To Top)	Right (Top To Bottom)	Typed	Normal	Wide Round 'O'	34j1 (Matching pattern)
	34m	2x4 - M-mold	8 / 22	Single Cornered Narrow Bottom Edge	Left (Bottom To Top)	Right (Top To Bottom)	None+Hand-written	Normal	Wide Round 'O'
	34o1	2x4 - O-mold 1	13 / 20	Single Cornered Narrow Bottom Edge	Left (Bottom To Top)	Right (Top To Bottom)	Typed	Normal	Wide Round 'O'
	34r	2x4 - R-mold	11 / 18	Single Cornered Narrow Bottom Edge	Left (Bottom To Top)	Right (Top To Bottom)	Typed	Normal	Wide Round 'O'
	34s	2x4 - S-mold	1 / 1	Single Cornered Narrow Bottom Edge	Left (Bottom To Top)	Right (Bottom To Top)	Typed	Normal	Wide Round 'O'
	34t1	2x4 - T-mold 1	20 / 20	Single Cornered Narrow Bottom Edge	Left (Bottom To Top)	Right (Top To Bottom)	Typed	Normal	Wide Round 'O'
	34u	2x4 - U-mold	9 / 20	Single Cornered Narrow Bottom Edge	Left (Bottom To Top) with exception(s)	Right (Bottom To Top) with exception(s)	Typed	Normal	Wide Round 'O'
	34v1	2x4 - V-mold 1	14 / 22	Single Cornered Narrow Bottom Edge	Right (Bottom To Top)	Left (Bottom To Top)	Typed	Normal	Wide Round 'O'	34v2 (Matching pattern - rotated 180 deg)
	34z1	2x4 - Z-mold 1	22 / 22	Centered Side Surface	Left (Bottom To Top)	Right (Top To Bottom)	Typed	Normal	Wide Round 'O'

35 - Old logo - 2x2r - with mold identifiers (1960-1965)

Photo	CatId	Mold	Members	Associations
	35b2	2x2 Quarter Circle B prefix	1 / 3

40 - Narrow Straight 'O' without mold identifiers (1965-1970)

Photo	CatId	Mold	Members	Associations
	40a	1x8	1 / 2

41 - Narrow Straight 'O' 1x6 with mold identifiers (1958-1970)

Photo	CatId	Mold	Members	PipStyle	Associations
	41c1	Cross support C-mold Corner pip	2 / 10	Single Cornered Narrow Bottom Edge
	41c2	Cross support C-mold Center pip	7 / 10	Centered Side Surface

42 - Narrow Straight 'O' 1x8 with mold identifiers (1958-1970)

Photo	CatId	Mold	Members	PipStyle	PatPendLayout	PatPendStyle	Associations
	42c1	1x8 Cross support Small hole C-mold Cornered pip	7 / 10	Single Cornered Narrow Bottom Edge	None	None
	42c2	1x8 Cross support C-mold Centered pip Aligned logos	6 / 10	Centered Side Surface	None	None
	42c3	1x8 Cross support C-mold Centered pip Rotated logos	6 / 10	Centered Side Surface	None	None
	42d2	1x8 Cross support D-mold Stud-logo top to bottom	12 / 12	Centered Side Surface	Left	Normal

45 - Other parts - modern logo (1960-1990)

Photo	CatId	Mold	Members	Associations
	45A	Samsonite waffle plates - narrow straight logo	1 / 1

90 - 90-Temp 10x20 (1962-1965)

Photo	CatId	Mold	Members	MoldIdentificationLayout	StudLogoStyle	StudRecessStyle	Associations
	90a	10x20 Normal logo - no X-shape - all studs have recess - no "700e"	1 / 1	None	Modern	Large sloped (3mm)
	90b	10x20 Narrow straight 'O' logo - no X-shape - no mold identifier - dot pattern underneath	1 / 1	Bottom Right	Narrow Straight 'O'	Large sloped (3mm)
	90b2	10x20 Normal logo - no X-shape - small circles-pattern underneath	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90c	10x20 Narrow straight 'O' logo - no X-shape - mold c	1 / 1	Bottom Right	Narrow Straight 'O'	Large sloped (3mm)
	90c2	10x20 Narrow straight 'O' logo - no X-shape - mold ab	1 / 1	Bottom Right	Narrow Straight 'O'	Large sloped (3mm)
	90c3	10x20 Narrow straight 'O' logo - no X-shape - mold Gb	1 / 1	Bottom Right	Narrow Straight 'O'	Large sloped (3mm)
	90d	10x20 Normal logo - no X-shape - mold f	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90e	10x20 Normal logo - no X-shape - mold I	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90f	10x20 Normal logo - X-shape - mold l	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90g	10x20 Normal logo - X-shape - mold m	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90h	10x20 Normal logo - X-shape - mold n	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90i	10x20 Normal logo - X-shape - mold p	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90j	10x20 Normal logo - X-shape - mold r	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90k	10x20 Normal logo - X-shape - mold s	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90l	10x20 Normal logo - X-shape - mold t	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90m	10x20 Normal logo - X-shape - mold v	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90n	10x20 Normal logo - X-shape - mold x	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90o	10x20 Normal logo - X-shape - mold y	1 / 1	Bottom Right	Modern	Large sloped (3mm)
	90p	10x20 Normal logo - X-shape - mold Æ	1 / 1	Bottom Right	Modern	Large (3mm)
	90q	10x20 Normal logo - X-shape - mold Ø	1 / 1	Bottom Right	Modern	Large (3mm)
	90r	10x20 Normal logo - X-shape - mold B	1 / 1	Bottom Right	Modern	Large (3mm)

Generations	Molds	MoldMembers
20	155	1086